Ottobock | 15
B500 Family
Closing the battery tray (on models without drive wheel
suspension)
1) Place the cover on the battery tray.
2) Close the strap.
3) Replace the seat bottom and push it down tightly.
4) Press the seat cushion firmly on to the hook-and-loop
material on the seat surface.
5.2.4 Charging the battery
See the power wheelchair instructions for use (user) for all
information regarding the charging process.
6 Adjustments
6.1 Prerequisites
WARNING
Incorrect settings
Risk of falling, tipping over or improper user posture due to
incorrect settings
►
Adjustments may only be carried out by qualified per
sonnel instructed by the manufacturer.
►
Check for safe function before delivering the product.
CAUTION
Unsecured screw connections
Risk of pinching, crushing, tipping over, falling of user
►
After all adjusting/readjusting work, retighten the
mounting screws/nuts firmly. Observe any torque set
tings which may be specified.
►
Any time you loosen a screw connection with thread
lock, replace it with a new screw connection or secure
the old screw connection with medium strength thread
locker (e.g. Loctite 241
®
).
Fine adjustments and setting changes to match the concrete
physical and mental condition of the user should always be
made in the user's presence.
All parts of the product should be cleaned thoroughly before
adjustments are made.
6.2 Basic Settings
The following fitting tasks are described in more detail in the
included Instructions for Use (User):
• Adjusting the Contour seat
• Adjusting the Recaro® seat
• Adjusting the side panels
• Adjusting the footrests
• Adjusting the belt lengths
• Adjusting the control panel
Adjustments
