4.3 Safety instructions for use
Hazards during preparation for use
WARNING
Independent modification of settings
Serious injuries to the user due to improper changes to the product
►
Do not modify the settings established by the qualified personnel. Only the settings described in the section
“Use” in these instructions for use may be adjusted independently.
►
In case of problems with the settings, please contact the qualified personnel who adjusted your product.
WARNING
Improper handling of packaging materials
Risk of suffocation due to neglect of the duty to supervise
►
Packaging materials must be kept out of the reach of children.
Risk of hand injuries
CAUTION
Pinching on components
Pinching, crushing due to lack of caution in danger areas
►
Do not reach between the drive wheel and side panel when driving your wheelchair.
►
Do not reach between the spokes of the drive wheel.
►
Pay attention not to pinch parts of your body between the side or frame parts.
CAUTION
Heat development when braking with handrims
Burns due to insufficient hand protection
►
Wear wheelchair gloves when travelling at high speeds.
Hazards while driving
CAUTION
Lack of driving experience
Tipping over, falling due to errors in handling the product
►
Practise on level, open ground first.
►
Learn with the support of an assistant how the product reacts to changes in centre of gravity, e.g. downward
or upward slopes, inclines or when overcoming obstacles.
CAUTION
Driving through confined spaces
Pinching of the hands, damage to the product due to getting stuck
►
Due to the large wheel camber, the wheelchair is considerably wider than conventional wheelchairs.
►
Do not operate in confined spaces or passages.
Hazards when overcoming obstacles
WARNING
Overcoming obstacles (e. g. stairs) is prohibited
Falling of the user or damage to the product due to failure to observe the indications for use
►
The wheelchair is designed for use on level floors/surfaces with no obstacles. Do not negotiate stairs, steps
or high curbs.
►
Crossing obstacles higher than
3 mm
leads to a loss of traction or getting stuck.
10
Safety
Invader 480S26=20000_K
Содержание 480S26 20000 K
Страница 1: ...Instructions for use 3 Invader 480S26 20000_K...
Страница 2: ...2 Invader 480S26 20000_K...
Страница 37: ...37 Invader 480S26 20000_K...
Страница 38: ...Invader 480S26 20000_K 38...