ENGLISH
TO USE YOUR KETTLE
1. Fill it through the spout or lid. To open the lid, simply pull up by the lock lid.
The water level must between “MAX” and “MIN”.
2. Be economical: do not boil more water than needed.
3. To improve the quality of your drinks always use fresh water.
4. Push the lid close firmly until it locks into position.
Note:
Ensure that the ON/OFF switch is clear of obstructions and the lid is
firmly closed. The kettle will not turn off if the ON/OFF switch is constrained
or if the lid is left open..
5. Plug the cord into the wall socket, and switch unit on by pressing the on/off
switch to the “
I
” position (the indicator light will turn on when the kettle is
working).
6. Your kettle will reach boiling point, and switch off automatically. To re-boil,
simply wait a few seconds then reset the on/off switch.
7. To avoid the risk of splashing, pour slowly and do not over-tilt the kettle.
Over tilting the kettle will split the flow, causing a scald hazard.
8. Empty the kettle after each use.
9. Your kettle is fitted with a scale filter to hold back limescale particles.
BOIL DRY PROTECTION
A safety shut off device will automatically activate should the kettle be
accidentally switched on without any water, or without sufficient water to cover
the element, or by allowing to boil dry. Should the shut off device be activated,
allow your kettle to cool down for a few minutes before refilling, to permit this
device to reset. This safety protection is applicable to all models.
CAUTION
1. When using your kettle, please take note that it will get hot when the water
is boiled. Please use the handle to hold the kettle. After the kettle has
switched off automatically (or has been switched off manually) it may need
time to cool down. After 15-20 seconds, the kettle can be switched on
again.
2. It the kettle ever boils dry, allow 15 minutes to cool before refilling with cold
water.
3
