OTTENSTEN 4PRO1250, Оригинальное руководство пользователя

Страница: 4 / 30

or safety joke contact arm
Plug installed on a tool shall release air pressure from the tool when disconnected from air supply
-4-
1. Insert a strip of fasteners into magazine. Keeping it point down.
2. Release the latch and pusher, slid the pusher against the nails.
3. Connect the tool to the air supply. Make sure the air pressure is in the correct range denoted in the
Technical Data.
4. Then test the driving depth in a sample piece of wood before using. If the fasteners are being
driven too far or not far enough, adjust the regulator to provide less air pressure or more air pressure.
cut off valve
do not hold the tool with trigger or safety depressed.