OTT SE 200, Руководство по эксплуатации

Страница: 6 / 28

4 Installing the SE 200
There are three different possible types of SE 200 installations:
䊳
as a stand-alone device
䊳
as an attachment to any mechanical level recorder:
– Variant 1:
Exisiting float cable is fed through the SE 200 float pulley
– Variant 2: SE 200 float pulley is coupled to the float pulley of the level
recorder via a carrier unit.
䊳
in a 4"; 4,5"; 5" or 6" observation well
An installation set with all required parts is provided along with the SE 200 to
install it as a stand-alone device and as an attachment (see Fig. 2).
Additional accessories required:
䊳
for the stand-alone device: Float, float cable, counterweight
䊳
for attachment device: –
䊳
for observation well installation: Observation well installation set, float,
float cable, counterweight
Note
䊳
SE 200 with float pulley for bead chain: Please refer to
Installation drawing for
Thalimedes with bead chain (55.430.025.4.7) which accompanies the bead
chain.
Co nn ecti n g a n gle A
+ f rictio n disc
Co nn ecti n g
a n gle B
Carrier
rail
Adhesive
strips
Cable
gla n d
Guide roller
Carrier base
Carrier
pi n
Holder
M 6 x 18
sel
f -locki n g
2 x M 6 x 25
2 x M 6 x 16
Fig. 2: SE 200 Installation Accessories.
Cut the adhesive strips to length
with scissors as required.
The holder and the cable gland are not
necessary for the installation of the SE 200.
The dimensions of connecting angle B
can be found in Appendix C.
6