OTT Hydrolab DS5, Руководство пользователя

Страница: 20 / 74

20
Operation
4.1.2 Using Hydras 3 LT for Parameter Setup
For more information on Hydras 3 LT, refer to the Quick Start Guide (Cat. No. 6234289) or
press the
F1
key while Hydras 3 LT is active.
1.
Attach the power and data cable to the Sonde. Attach the 9-pin connector to a PC.
2.
Start Hydras 3 LT. Wait for the software to scan for connected Sondes. Highlight the
multiprobe and press
OPERATE SONDE
.
Note: If the Sonde appears to be connected and the software does not recognize the Sonde
connection, remove and replace the connector cable and press RE-SCAN FOR SONDE. Repeat
until Hydras 3 LT recognizes the Sonde.
3.
Click on the Parameter Setup tab and select the parameter tab to be configured.
4.
Enter the appropriate values and press
SAVE SETTINGS
.
4.1.3 Specific Conductance Parameter Setup
For specific conductance set the following functions using Hydras 3 LT or the Surveyor:
•
Select the specific conductance function (Fresh, Salt, StdMth, None, or Custom).
• Fresh
(default) is based on the manufacturer’s freshwater temperature
compensation. This function is derived from