ET4100CPp-TS
Transmitter of 4-port 10/100Mbps TX(PoE+) to 1-port Coax Ethernet Switch with PoC
1
V1.1
This quick start guide describes how to install and use the 4‐port 10/100Mps transmitter with Power over Ethernet
(PoE+). The product is designed for IP CCTV system upgrade.
Overview
The ET4100CPp‐TS (Transmitter) works with the ET1100CPp‐R (Receiver) to provide Ethernet Extension of 4
channel 10/100Base‐TX copper Ethernet to 1‐port coaxial. The maximum coaxial cable distance is 800m. The
product support PoE+, hence, no power point is required for the transmitter side and the connected IP camera if
the camera support Power over Ethernet (PoE+).
General
To ensure trouble free transportation and storage, all OT Systems products must be thoroughly inspected, tested
and properly packed before delivery. Check the product upon receipt for any visible damage which may have been
caused during shipment.
Package Content
ET4100CPp‐TS x
1
Quick Start Guide x 1
Physical Description
Front Panel
