ET1200CPp-RS4
Receiver of 4-port Coax to 1-port 10/100/1000Mbps Ethernet with PoC
1
V1.0
This quick start guide describes how to install and use the 4-port EoC (Ethernet over Coax) receiver with Power
over Coax (PoC). The product is designed for analogue CCTV system upgrade.
Overview
The ET1200CPp-RS4 (receiver) works with the ET1100CPp-T (transmitter) to provide Ethernet Extension of 4
channel 10/100Base-TX over Coaxial cable to 1-port 10/100/1000Mbps Ethernet. The maximum coaxial cable
distance is 800m. The product support PoC, hence, no power point is required for the transmitter side and the
connected IP camera if the camera support Power over Ethernet (PoE). The product is good for retrofit of
analogue system by using the existing cable infrastructure.
General
To ensure trouble free transportation and storage, all OT Systems products must be thoroughly inspected, tested
and properly packed before delivery. Check the product upon receipt for any visible damage which may have been
caused during shipment.
Package Content
Receiver of 4-port Coax to 1-port 10/100/1000Mbps Ethernet with PoC
x
1
Quick Start Guide x 1
Physical Description
Front Panel
Rear Panel
Mounting holes
