OTOS Air Wing, Руководство пользователя

Страница: 4 / 15

Air Wing
7. Filter
Particle filter : purifies fine particles and mote contaminant.
Odor Filter : After the particle filter process, the odor filter removes foul odor and odor
particles.
6. Check-up points before use;
If the filter is equipped right, (See page 5)
If the connecting hose has any problem and is connected to the Air Wing s body
exactly, (See page 6~7)
If right airflow is supplied upon taking airflow test, (See page 8 for airflow test)
If alarm sounds exactly and danger indication ( ) is displayed right blocking out-
let when operating Air Wing.
If the hood has any problem,-check up any part being torn or any part with wrong
needlework
If the air is supplied into the facial part when operating Air Wing.
Hold
Push
Picture 1 Assembling particle filter
Particle Filter Particle Filter PreFilter Spark
Protection
Filter
Cover
Left
Right
8. How to equip the Particle Filter
The power must be turned off when replacing the filters.
Assemble the wire netting and pre-filter to the filter cover in order and then assemble the
particle filter as shown in the Picture 1
Place the filter cover on the main body of the Air Wing and lock it by turning it clockwise
until it clicks.
How to equip the Odor Filter
As shown in the Picture 2 , mount the Odor Filter to the left of the Air Wing s body first,
and then push the right until hearing Click sound.
Mount the filter cover on the left of the Odor Filter first, and then push the right until hearing
Click sound.
Hold
Push
Hold
Push
Particle Filter
Odor Filter
Picture 2 Assembling the Odor Filter
(Please equip the Particle Filter after equipping the Odor Filter first.)
Odor Filter
Do NOT use Odor Filter without Particle filter
Left
Right
10. How to operate
How to start : Press ON button on the body for 1~2 seconds then the product gets started
operating with warning alarm.(Picture 1)
Airflow Control : If the product is operated first, it starts with LOW (160 / min) at the
flow-meter. When more airflow is needed, press FLOW button once
again and set the airflow at HIGH (200 / min). If ON button is
pressed once again at HIGH, it becomes LOW again. (Picture 2)
How to stop : Press OFF button for 2~3 seconds then the product gets stopped operating
with warning alarm. (Picture 3)
Picture 1. How to Start
Picture 3. How to Stop Picture 2. Airflow Control
Unsealed filter is valid for 5 years since the manufactured date.