11
10
Stick a both sides adhesive tape
on
the belly in front of the body. Bring the
center mark of the hakama to the center
of the body and stick it with the tape.
front
front
Line the top of
the tape along the
projections.
both sides
adhesive tape
projection
the front of
the hakama
First, fold the hakama in half
and mark the center with a
pencil. Then, put the legs
through the hakama.
center
Check!
After the belly part of the hakama
is attached, bend the body to check.
If the knee parts are too tight,
remove the hakama from the belly
and stick again a little lower.
Stick both sides adhesive tapes
over the heels and the ankles and
stick the bottoms of the hakama
with the tapes.
Check if this part is too tight.
Keep the bottom
of the hakama
above the heel.
both sides adhesive
tapes
Stick the belly part of the hakama
with a both sides adhesive tape
.
Leave 3mm room at the back.
Attach the pad to the back.
pad
back
back
both sides
adhesive tape
Leave 4mm
room from
the top.
about
3mm
the line to
fit the top of
the sticker
Check!
front
a half-cut of a both sides
adhesive tape
Overturn the doll and make
tucks from both side to fit the
waist and stick with a half-cut of
a both sides adhesive tape
.
After the doll is dressed in hakama, put in
three iron balls and set the head and check
the motion just like the Checking the Motion
part.
If it doesn't somersault smoothly, adjust the
position where the hakama is attached.
Remove the head and
iron balls after the check.
Dressing the Doll in Hakama
