D. Tympanometry results
The results table shows the results related to the currently selected curve:
•
Probe
(the probe tone in Hz)
•
TPP
(Tympanometric Peak Pressure)
•
ECV
(Equivalent Ear Canal Volume)
•
SA
(Static Peak Admittance), or
SC
(Static Peak Compliance) when volume equivalent units are used
•
TW/Ratio
(Tympanometric Width/Tympanometric Ratio). Describes the steepness of the curve.
•
Type
(Jerger types A, As, Ad, B, C, D and E denote the shape of the 226 Hz curve). You can set the type to be
determined automatically, and you can subsequently change it manually, if necessary.
E. On-screen selections
Curve selection
Press the
Previous Curve
or
Next Curve
softbutton to select the desired curve in
the Reflex Screening and Tympanometry result tables.
Manually adjusting the TPP
Press the
Edit TPP
softbutton, use the dial to move the marker to the desired
TPP, and press the
Done
softbutton.
Changing tympanogram curve type
Press the
Edit TPP
softbutton. Press the
Change Type
softbutton until the
desired type is shown, and press the
Done
softbutton.
Deleting a curve
Select the curve you wish to delete, and press the
Delete
button.
To replace a single measurement, delete a curve and adjust the measurement
selections to redo the single measurement.
9
Managing test results in MADSEN Zodiac
The following applies to managing test results in MADSEN Zodiac. If you wish to perform these actions in OTOsuite, see
the OTOsuite User Guide or OTOsuite Reference Manual.
Swapping ear results
If you have tested a patient with the wrong ear selected, you can swap the ear results both during a session and after a ses-
sion so that the results are assigned to the other ear. Swapping applies to all tests made on that patient.
Deleting measurements
1. You can delete a single measurement curve by using the soft-button functions
Previous Curve
or
Next Curve
to select
the curve you wish to delete.
2. Press the
Delete
button.
19
User Guide
Otometrics - MADSEN Zodiac
