otometrics madsen itera ii, Справочное руководство

Страница: 87 / 134

10 Setup of parameters
10.1 What does SETUP do?
You can use
SETUP
to define all of the normal parameters and setups in the audiometer.
Permanent changes
You can change the parameters permanently and save them in a specific test setup of your choice
• How to use SETUP ► 87
• SETUP items ► 89
Temporary changes
You can make temporary changes to the various parameters during a test. These changes will not be saved.
• Temporary changes in the setup ► 88
10.2 How to use SETUP
10.2.1 Permanent changes in the setup
1. To access changing your parameters press twice on
SETUP
.
When the SETUP function is active, the SETUP indicator light flashes. Most other buttons are deactivated and audi-
ometry cannot be performed.
2. Turn the
left LEVEL
knob to select the parameter item you wish to change.
When you select a new item, the item number is displayed briefly in the bottom line, for instance:
Item 5
As a rule, the top line in the display contains a description of the current parameter, for instance:
SF TRANSDUCER
The bottom line contains the value that you can change. The values available are shown one line at a time, for
instance:
---- (None)
HDA 200
TDH39
EAR-T.
(E-A-R-TONE® 3A)
F.F.
3. To change the actual parameter value, for most items, use the
Right level
knob.
4. Changes made under SETUP will be saved when you leave SETUP , and will apply the next time MADSEN Itera II is
switched on.
5. The most recently selected item will also be the one displayed the next time you activate
SETUP
.
6. To exit this function press twice on SETUP .
10.2.2 Return to default settings
To return to the default settings, see SETUP items ► 89 .
Otometrics - MADSEN Itera II 87