10.Wiring Signal Path
-2
Protect case by vinyl tape underneath
Good soldering hint:
Wire should be pre-soldered to the plating before soldering ,
as shown as the below picture.
15
Rev.1.0E All Copy Right Reserved by otomatsu
Chassis ground is fasten by 3mm screw and small washer, like this
picture.
High light XLR Combo wiring.
Good soldering hint : All wires should be pre-soldered by plating
before wiring to the XLR socket.
otomatsu
Balanced Headphone Amplifier kit , BDR-HPA1E
