4
4
4
www.otophotonics.com
Main Power Switch
Auto/Manual Switch
D2 Switch
HAL Switch
Shutter Switch
I/O pin 1
Operation Selection Features
Manual Mode Operation step
Step.1 After plugging the +12V power to the Deuterium-Halogen
(DH) light source, user can turn on the main power by the
Main Power Switch. The Power Green LED will be
lightening “ON”.
Step.2 Then user can select the Auto/Manual Switch. Once the
manual mode is selected; that means the switch is at the left
position.
Step.3 After manual mode is selected, user can turn on/off the D2,
Halogen, or Shutter function by sliding the switches.
LS-DH Series Operation Manual-801 Rev.1
Deuterium-Halogen Light Series
Operation Manual
www.aptechnologies.co.uk
AP
Technologies Limited The Coach House Watery Lane Bath BA2 1RL
T: +44 (0) 1225 780400 F: +44 (0) 8701 266449 E: [email protected]