Untighten the right
knob, put the Alarm,
RS-485 and video
cables through the
hole and tighten the
knob
Connect the
telemetry control
(RS-485) to RS-485
Input
(TXDI+,TXDI-)
Connect the Alarm
input cable to Alarm
Input
(Alarm 1 & GND)
Connect the video
cable to output jack
2. Connect Alarm, telemetry control (RS-485) and Video cables:
3
Outdoor Housing for IP Series Connection
GND
NO
NC
COM
6
5
4
3
2
1
GND
TXDO-
TXDO+
TXDI-
TXDI+
RS-485
Alarm In Alarm Output
ACInput
ACOutput
FastDomeWiring
Fan&Heater
Wiring
DC12V Input
VideoOutput
RJ-45
1. Connect AC / DC cables:
Untighten the left
knob, put the AC
power cable through
the hole and tighten
the knob
Connect the AC
power cable to AC
Input jack
Connect the AC
power cable(below)
to AC Output jack
Connect the DC
power cable(above)
to DC Input jack