oticon FittingLINK WP-2, Инструкция по эксплуатации

Страница: 15 / 30

28 29
Make sure that the neck loop is not curled or touching any electrical wires or equipment
and that the hearing instruments are not touching the neck loop.
The optimal placement of the hearing instruments is on the outside of the neck loop,
between 5-10 cm/2-4 in. from the neck loop as shown in the drawing.
The distance between FittingLINK and the Bluetooth adapter in your PC can be no more
than 10 metres (in direct line of sight).
Devices and installations such as power cables, TVs, PC monitors, LED light bulbs and
other devices emitting magnetic noise might decrease the programming performance if
placed too close to FittingLINK. Likewise a table made of or containing a lot of metal, may
lead to decreased performance.
Please note that other active FittingLINK devices and wireless hearing instrument
accessories in proximity may create interference and should be turned OFF.
If you experience decreased performance, we recommend that you relocate FittingLINK
or turn off possible sources of interference.
At the end of the session and before disconnecting or removing FittingLINK make sure
that you have saved your programming to the hearing instruments.
Please consult the fitting software for further guidance.