You can change hearing aid programs and volume with the Remote Control.
When the status light on the remote control lights
up steady green for 10 seconds, the devices have
been paired successfully.
Operating Range
You can operate your hearing aids with the remote
control from a distance of up to 1.8 meters.
(approximately 6 feet)
Press “+” to
increase volume
(louder sound)
Press to change
program
Press “–” to
decrease volume
(softer sound)
Mute
Use the mute function if you need to silence the hearing aids while wearing them.
Press and hold the volume down button for approximately 2 seconds until the status
light turns off, to mute the hearing aids.
Unmute
Briefly press any button on the remote control to unmute your hearing aids.
Press for
approximately
2 seconds
www.oticon.com
Place both of your hearing aids
within range of the remote control.
(within 20 cm, approximately 7 inches)
11370 15555-0864/06.16
Open and close the battery drawer on both of your hearing aids.
Press any button on the remote control and it will automatically pair with
the hearing aids in range.
Before the remote control can be used with your hearing aid(s),
they need to be paired with your hearing aid(s).
Check that the remote control has working batteries by pressing any button.
(The status light at the top should light up if the batteries are good.)
Using
Remote Control 3.0
1
2
3
4
5
6
