oticon BTe 13 Sp, Инструкция по эксплуатации

Страница: 14 / 32

26 27
If the program push-button is enabled and you or your child wants to toggle between
DAI programs, simply use the push-button.
As long as the DAI adaptor is connected to the instrument, two programs (DAI + micro-
phone and DAI only) will automatically be added after the standard programs, which have
been programmed into the hearing instrument by the Hearing Care Professional.
Important notIce
When the DAI cord is connected to equipment plugged into standard wall outlets, this
equipment must comply with IEC-60065, IEC-60601 or equivalent safety standards.
Audible and visual indicators
The instrument has two means of status indication, the audible beeps and a visual
indicator (LED). These indicators are configured by your Hearing Care Professional. In the
table below you find an overview of the behavior and the possible configurations of the
indicators.
Visual indicator
(LED: Light Emitting Diode) Audible beeps
Instrument
is turned on During startup the LED is always lit.
After startup the LED will blink according
to the active program number when the
instrument is turned ON.
The instrument will start up by
playing a jingle indicating that
the battery is working and the
instrument is operating.
Instrument
is operating
and program
setting The blinking pattern indicates the
program setting:
P1: One blink followed by a pause and
then one blink and a pause, etc.
P2: Two blinks followed by a pause and
then two blinks and a pause, etc.
This feature can be disabled.
No audible beeps.