0000
Power on
Press the on/off button for
approx. 2 seconds
until all front
lights are on, and the on/off
indicator on the top is green.
Power off
Press and hold the on/off button
for approx. 2 seconds
until the
green on/off indicator is turned
off.
Pairing the Ponto Streamer
Before the Ponto Streamer can be used with
other devices – such as a cell phone – the two
devices have to be paired.
Put the Ponto Streamer in pairing mode.
Press and hold the on/off button for approx. 5
seconds, until the on/off indicator blinks blue.
The on/off indicator will switch to steady blue
to indicate successful pairing.
Both the Ponto Streamer and the second device
need to be in pairing mode. The pin code for
the Ponto Streamer (if requested) is 0000 (four
zeros).
More information: page 22 in the Instructions for Use
More information: page 32 in the Instructions for Use
More information: page 39 in the Instructions for Use
Mobile phone
Answer a call
When your mobile phone rings, you will
hear an incoming call alert in your sound
processor, and the phone button on the
Ponto Streamer and the status indicator
will blink green.
Press the phone button briefly
to answer the call.
Off/on for surrounding sounds
Press and hold volume up AND volume
down buttons for approx. 1 second
simultaneously.
Reject call
An incoming call can be
rejected by
briefly pres-
sing the volume down
button.
Make a call
To make a call you
only
need to operate the cell
phone.
The call is
automatically con-
nected to your Ponto
Streamer.
Microphone
T-coil
The Ponto Streamer has a
built-in tele loop receiver
(T-coil).
To receive sound from the
tele loop receiver press and
hold
the AUX selector for
approx. 2 seconds.
More information: page 62 in the Instructions for Use
Remote control of the
sound processor
The Ponto Streamer functions as
a remote control for your sound
processor when not used
for streaming.
Volume up/down
Press briefly
up or down
Change program in the
sound processor
Press & hold
up or down
More information: page 30 in the Instruction for Use
Music
You can listen to music via the mini jack cable at
the bottom of the Ponto Streamer or wireless via
Bluetooth.
Music is chosen by a
brief
press on the AUX selector.
More information: page 54 in the Instructions for Use
ConnectLine microphone
Note: requires additional equipment.
Makes it possible to transmit sound
from a chosen speaker to your
sound processor through the Ponto
Streamer.
Press the microphone button
briefly
to activate the microphone.
More information:
www.oticonmedical.com/connectline
Phone solution
Note: requires additional equipment.
Makes it possible to use
the Ponto Streamer with a
traditional analog landline
phone.
Press the phone button briefly
to take a call.
More information:
www.oticonmedical.com/connectline
TV solution
Note: requires additional equipment.
Makes it possible to transmit
the sound from a TV to your
sound processor through the
Ponto Streamer.
Press the TV button briefly
to activate the TV.
More information:
www.oticonmedical.com/connectline
