Oti 6500 TRIO Specification
Version 1.5
Basic Operation
Confidential & Proprietary
page 7
Introduction, the 6500 TRIO reader contains three card interfaces:
Magnetic card swipe reader
Contactless reader
Contact reader
2.1
Magnetic Stripe
When a valid magnetic payment card is swiped, the reader reads Track 1
and Track 2 data stored on the card’s magnetic stripe. If the data is valid, the
unit will display a row of 4 LEDs that light up in sequence followed by a
beep. The reader then communicates the transaction data to the Host.
The interactive LCD, LEDs, and buzzer give the user an indication of the
transaction status.
2.2
Contactless
When a valid contactless payment card is presented to the reader, the reader
performs a payment transaction with the contactless card. If the transaction
is accepted, the unit will display a row of 4 LEDs that light up in sequence
followed by a beep. The reader then communicates the transaction data to
the Host.
A landing zone logo on the graphic overlay under the reader’s LCD
indicates where the contactless card or tag should be presented.
The interactive LCD, LEDs, and buzzer give the user an indication of the
transaction status.
2.3
Contact
When a valid EMV contact chip card is inserted into to the reader contact
slot, the reader performs a payment transaction with the contact card. If the
transaction is accepted, the unit will display a row of 4 LEDs that light up in
sequence followed by a beep. The reader then communicates the transaction
data to the Host.
The interactive LCD, LEDs, and buzzer give the user an indication of the
transaction status.
