User manual
1
1.
Introduction
The OTECABLES
DI
Verse
direct box is a product designed for all demanding musicians and audio professionals from live
audio world or recording studio field. Thanks to the amazing quality and careful choice of components, the
DI
Verse
is
able to capture sound of any instrument with greatest clarity. Precisely optimized passive electronic design leads to
unmatched signal to noise ratio and linear transmission without any degradation of the signal. When overdriven, the
famous LUNDAHL transformers does not distort, instead they provides warm analog saturation with rich, pleasant
harmonics. Blue and green mono models feature a 6,3 mm TRS jack output behind the transformer section. All the
products in the
DI
Verse
line are able to eliminate buzz or hum caused by ground loops in the signal chain. Heavy duty
design of
DI
Verse
DIboxes is ready to withstand the rough conditions on the road and to maintain performance stability
for recording applications.
2.
DI
Verse
models
DI
Verse
BLUE is the universal live and recording tool specificaly designed for low impedance audio sources, such as
keyboards, synthesizers, guitars and basses with active pickups, audio interfaces, effect pedals or guitar amplifier
outputs. It features the LUNDAHL general purpose LL1570 transformer. The input is transformed with 1:1 ratio (default
setting), so the output signal is transferred at the
original level with maximum clarity. In addition
DI
Verse
BLUE offers
an extra option of feeding an extremely long audio signal conduction from the DI’s output. This is a big advantage in
situations where, for example, analog vintage gear used at the Front Of House at a large stadium show. For these
occasions the electronic unit of DIVerse products offers the possibility to internally reconfigure the circuit to provide
extremely low impedance output of 150 Ohm with 2:1 conversion (thus with -6dB level correction).
DI
Verse
BLUE is
available in both mono and stereo version.
DI
Verse
GREEN HiZ model is a classic DI box tailored for high impedance audio sources, like basses and guitars with
passive electronics or Hammond organ. It features the LUNDAHL LL1935, the DI designated transformer. The input is
transformed with ratio 10:1 (internally switchable to 5:1) which allows to preserve the whole frequency spectrum of
the signal without any loss of dynamic range over long output cable connections.
DI
Verse
RED ISO model is a stereo galvanic isolator. It features the very high-level LUNDAHL LL1588 transformers,
which can operate at extremely high input levels without any kind of signal coloration. Compared to the BLUE model,
the line level can be EIGHT times higher before any noticeable saturation of the signal occurs. This feature makes it
most suitable for applications where you need to transport high levels of signal without compromising the lowest
frequencies, for example when you need to interconnect line-level devices like mixing consoles, PA processors,
amplifiers, DJ equipment, modular synths, recording and broadcasting units, distant PA delay zones, etc.
Содержание DIVerse
Страница 1: ...USER MANUAL...
