SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
6-8
5. (Optional) Click
Refresh
to refresh the information.
6. (Optional) Click Download Log to download the log file from the log server.
7. (Optional) Click Clear to clear the logs.
– End of Steps –
6.7.
Diagnosis
The section describes how to diagnose connectivity issues.
Diagnosis
provides the
parameters of the Diagnosis configuration features.
The relevant information includes ping diagnosis, trace route diagnosis, DSL line diagnosis
and simulation.
Steps
1.
On the main page of the Speedport Entry 2i, select
Management > Diagnosis
to
go to the
Diagnosis
page.
Ping Diagnosis
2.
Click
to open
Ping Diagnosis
page, as shown in
Figure 6-9 Ping Diagnosis Page
3. Set the parameters. For a description of the parameters, refer to
Table 6-4 Ping Diagnosis Parameter Descriptions
Parameter
Description
IP Address or Host Name
Destination IP address or host name to check connectivity to.
Egress
Data direction.
4. Click
Diagnosis
to diagnose the connection. The system will display the diagnosis
results.
