SJ-20162405182123-002|2016-05-24 (R2.0)
Configure the Management and Diagnosis
6-5
6.4.3.
Manage the User Configuration
This procedure introduces how to import or export the user configuration file.
User configuration refers to the customized configuration based on the factory defaults.
The user can configure the device settings based on his own requirements, and
the configuration can be backed up.
Steps
1. On the main page of the Speedport Entry 2i, select
Management > System
Management > User Configuration Management
to go to the
User
Configuration Management
page.
The page is shown in
Figure 6-6 User Configuration Management Page
2. On this page, you can perform the following operations:
l Click
Backup Configuration
to export the user configuration file.
l Click
Browse
to select the user configuration file, and then click
Restore Configuration
to restore the device to the user configuration.
After the user configuration file is imported, the system will restart.
– End of Steps –
6.5.
Check the TR-069
TR-069
provides the parameters of the TR-069 configuration features.
Note:
