OTC TPWS TESTER, Руководство пользователя

Страница: 45 / 52

SP04500137 45/52 User Guide TPWS Tester
OTC Technical Support: (800) 933-8335
TPWS TESTER
User Guide
MISCELLANEOUS
1. CHARGE
Low Battery Indication
Your
TPWS TESTER
incorporates a low battery
detection circuit. Battery life is an average of 800
sensor tests per battery charge (approximately 160
to 200 vehicles) this may change following the sensor
model.
Battery indicator status:
When low, icon is flashing and the
tool will turn off after 10 seconds.
DO NOT use the tool with low battery status because the transmission and emission may not
be reliable.
When charging, the battery light is red and becomes
green when the battery is fully charged.
For charging the tool, directly plug the supply jack to the tool and plug the supply in an
appropriate outlet. The LED " CHARGE " light will turn on (red).
Battery replacement
Unscrew the two screws on
the back of the tool.
Remove the cap.
Unplug the battery and
change the battery with a new
one.
Reinstall the cap and the
screws.
Please recycle the used battery. See Battery and Recycling information in the
chapters 5 and 6 below.