OTC AirEZY2405-SWG, Руководство пользователя, Страница: 7 / 14

1 cable 7 ft Dark Blue Cross over cable for Hub connection
1 each Plastic Retaining Plate
1 each Adhesive Pad
1 each Software Diagnostic Disk
4.0 AirEZY2405-SWG Placement
After removing AirEZY2405-SWG from the shipping box, be sure to lay out all the contents to ensure
that all necessary components are accounted for before you begin the installation process. Refer to
Section 3.0 of this manual for a complete list of provided components. AirEZY2405-SWG is a spread
spectrum direct sequence transceiver unit. In order to maximize AirEZY2405-SWG’s full wireless
LAN capabilities, the proper placement of your AirEZY2405-SWG unit is crucial to its overall
performance.
(See Appendix A) Place the AirEZY2405-SWG unit on top of your file server unit,
desktop PC, or lap top PC. AirEZY2405-SWG will perform the best when it is placed at a higher
location adjacent to your system. If possible, place the AirEZY2405-SWG unit in a location so that the
antenna extends above the top of your file server or computer.
4.1 AirEZY2405-SWG Installation Overview
AirEZY2405-SWG is designed to be easy and quick to install. The AirEZY2405-SWG has built in
auto-detection features that will auto-detect which application environment it is operating under, this
feature facilitates quick and easy installation.
In order to use your AirEZY2405-SWG wireless LAN, you must have purchased at least two units.
For optimum performance, AirEZY2405-SWG supports up to 6 units within a small work group
configuration (including the unit placed at the file server).
(NOTE: If you intend to use the
AirEZY2405-SWG in a network configuration that requires more than 6 wireless nodes, we
highly recommend that you install the AirEZY2405-SWG-Access Point onto your wireless LAN
segment. Please call your OTC Telecom, Inc. sales representative or your authorized reseller
for additional access point information).
The following section describes three (3) standard installation scenarios for your AirEZY2405-SWG
wireless LAN installation:
CASE 1: Client / Server Installation without AirEZY2405-SWG-AP(Access Point)
In order to set up your wireless LAN, one AirEZY2405-SWG unit must be designated as an AirEZY-
Server . This unit automatically configures to become the “access point” on your wireless LAN
segment. The AirEZY-Server unit must be connected directly to a file server, hub , switch, or router on
your LAN segment for the client/server configuration to work properly. The other corresponding units
to be located at your remote PC, laptop, notebook, or printer device, will be configured as
AirEZY-
Clients . In a typical office environment, place all the AirEZY2405-SWG units within a 350- 500 feet
radius of the AirEZY-Server unit. When installing your wireless network, be sure to connect and
power on the AirEZY-Server unit first! This step is crucial in allowing the auto-detection features to
be activated properly.
Diagram 1 Using AirEZY2405-SWG-SWG in Client/Server without AirEZY2405-SWG-AP