OT Systems FTD110DB-SMR3, Инструкция по установке и эксплуатации

Страница: 14 / 16

FTD110DB-XXR3 Series Installation & Operation Manual
www.ot-systems.com 14
(6) Specifications
MODELS*
PARAMETERS
FTD110DB-SSR3SA
FTD110DB-SSR3
(Single-Mode)
FTD110DB-SSR3LSA
FTD110DB-SSR3L
(Single-Mode)
FTD110DB-SMR3SA
FTD110DB-SMR3
(Multi-Mode)
OPTICAL
No. of Fiber / Connector 3 / ST(or FC) 3 / ST(or FC) 3 / ST(or FC)
Wavelength 1310/1550 nm 1550/1310 nm 1310/1550 nm
Optical Power Budget 17 dB 24 dB 23 dB
Max Distance 40 km 60 km 4 km
ELECTRICAL VIDEO
Channel / Connector 3 / BNC
System PAL, NTSC, SECAM
Bandwidth
≥
6.0 MHz
Input/Output Impedance 75 Ohm
Input/Output Level 1.0 Vp-p typical
Differential Gain < 1% typical
Differential Phase < 1
o
typical
SNR >60dB
DATA
Channel / Connector 3 / 7-pin Screw Terminal
Direction Bi-directional (Duplex)
Electrical Format RS232, RS422, RS485 (2-wire, 4-wire)
Transmission Rate 0~256 Kbps
POWER
Power consumption 12VDC @ 8.4W
Power Supply Standalone unit: FT/PA12V DC Adaptor
Card module: Powered by FT-C18 chassis
Connector (Micro unit) 2-pin Screw Terminal
PHYSICAL
Weight Standalone unit: 0.9 kg Card module: 0.4 kg
Dimensions (W x H x D) Standalone unit: 156 x 50.5 x 223 mm (MAX)
Card module: 148 x 41 x 213 mm (MAX)
ENVIRONMENTAL
Operating Temperature -40
o
C ~ +75
o
C
Storage Temperature -40
o
C ~ +85
o
C
Relative Humidity 0 ~ 95% non-condensing
MTBF
>100’000 Hours
*
If the optical connector is FC type, the suffix in the model number will be
“-
F XX
”. Eg. FTD110DBMicro-
F ST