OSTLING EU 80, Руководство по эксплуатации

Страница: 5 / 9

Operating instructions EU 80
ÖSTLING Markiersysteme
4
3.0 Programming procedure
•
Plug the banana plug with the red cable in the red plug insert (Pos. 5a).
•
Attach the other end of the red positive cable with the connector on the marking
head (Pos. A).
•
Plug the banana plug with the blue cable in the black plug (Pos. 5b).
•
Put the other end of the blue negative cable on an electrically conductive base, or
directly on the product.
•
Plug in the power cord (Pos. 8) with 230 V AC- alternating current.
3.1 Preparing the marking head
Prepare a piece of black felt in the same size as the surface of the marking head.
Fit a piece of conductive net (Pos. D) so that the net covers the edge of the marking
head (Pos. B) approyimately 15 mm. Now place the felt (Pos C) on the marking
head, and place the conductive net over the felt in order that you may fasten the
cassette felt (Pos. E) with the net. Slip an o-ring over the net and around the
marking head so that everything is secure.
Pos. A Connection to positive cable
Pos. B Marking head
Pos. C Felt
Pos. D Conductive net
Pos. E Cassette
3.2 Moistening the felt with electrolyte
Before you use the marking head we reccomend that you rinse it with clean water so
that the felt is soaked. After you have wrung out the felt to get rid of excess water,
you may operate with the electrolyte.
A
B
C
D
E