The
Blender, a
Unit
LOW this speed setting is used for chopping and processing small quantities of medium or soft
textured foods to a smooth mixture.
To chop foods, turn the switch to the LOW setting for 2 seconds, turn to OFF and let blades come to
a stop. Repeal for the number of times given in the recipe. This technique can also be done in the
HIGH setting for chopping harder-textured foods.
To process continuously for mixing light loads, leave the switch in the LOW position until the
desired consistency is achieved.
HIGH this speed setting is used for chopping hard-textured foods and processing smooth
mixtures.
in the OFF position, theappliance stops operating.
Scraping the Container
-Turn unit OFF.
Use a rubber spatula to push foods away from the sides of the container.
- Put cover on container.
-To blend again, turn unit to LOW or HIGH.
C L A S S I C
-Follow blending steps.
l
Soparatlng Container from Motor Base
Never Take Container from Base During LOW or HIGH operation.
- Unplug unit.
-Lift container straight up.
-if it does not lift out easily, rock gently then lift.
D0
not twist.
Removing Foods
Never Store Foods in Your Blender Container.
- Take cover off.
- Pour liquids/light
batters
from top of container.
-Take thick mixtures out from the bottom of the container.
Removing
if you cannot unscrew the container bottom, put container back
on the base, as shown.
-Turn container to right.
- Only loosen part way.
- Carefully lift container from base. (Bottom will be loose,)
A short power supply cord has been provided to reduce the hazards resulting from becoming
entangled in or tripping over a longer cord. An extension cord may be used if care is exercised-in
its use. lf an extensfon cord Is used, the markedelectrical rating of the cord should be at least as
great as the electrical rating of the appliance and
the extension cord should be arranged
that It will not
drape
over the Countertop or tabletop Where It can be pulled on
by children or pets I tripped over
