7
6
Learning about the Texture Select Master Series Blender
1. Filler Cap / 2 Ounce Measuring Cup: – Allows you
to add ingredients during use. Also allows you to
open to allow steam to escape when blending hot
foods.
2. Jar lid – Seals the blender jar.
3. Jar – 6-cup Dishwasher Safe Boroclass glass jar
withstands thermal shock.
Glass Jar Blade Assembly – With locking feature to
secure blade assembly to threaded jar bottom. Seals
the jar to the blade for leak-proof operation.
4. Sealing Ring
5. Blade – 50% Larger blade system than
traditional Oster Blenders.
6. Threaded Jar Bottom With Locking Lever –
Advanced design for simple assembly to jar.
7. Motor Base – Holds the jar securely. Contains a
powerful, variable speed motor.
8. Control Panel
a.
Power Button (On/Off button) Turns the
product On and Off.
b. Pre-Programmed Settings Use for flawless
results at the touch of a button. Select the
desired setting and your Oster
®
Texture Select
Series blender cycle through the program,
delivering expert results at the touch of a button.
Unit will Stop after running through the cycle.
Select From:
Smoothies
Food Chop / Salsa
c. Texture Settings Use to select for your desired
consistency-Thin-Medium-Thick
d. Manual Controls Select from Low-Med-High
e. Start/Stop button Press to start/stop any cycle
or manual control setting.
f. Pulse button – Press to pulse and release to
stop. Perfect for Crushing Ice.
1
2
3
4
5
6
7
8
6 Cup glass Jar Assembly
1. Place Blade into Threaded Jar Bottom (Fig.1).
2. Place sealing ring over blade assembly. Carefully press
and tuck sealing ring into locking groove (Fig2).
3. Ensure the locking sealing ring is fully and evenly
tucked in place and holding the blade assembly to the
threaded jar bottom. For correct assembly see (Fig3).
4. Install the Integrated Blade Assembly onto the Jar. Turn clockwise to tighten.
Be sure the Integrated Blade Assembly is tightened to the jar before using.
NOTE: For proper installation onto Blender Motor base, make sure locking
lever rotates past the anti-rotation tabs on the Blender jar or smoothie cup.
See (Fig4).
CAUTION: If Locking Lever is damaged or missing, do not operate blender,
and contact Customer Service for a replacement.
5. Put the ingredients into the jar.
6. Secure the lid and filler cap.
7. Place the jar onto the base.
8. Plug the power cord into a standard household
120/127-volt, 60 hz. AC outlet. You are now ready to start.
ALWAYS PLACE HAND ON CONTAINER COVER
WHILE OPERATING BLENDER.
Using the Control Panel
1. Make Sure the “OFF” button is pressed before plugging in the blender.
2. Select setting and blend ingredients to desired consistency. Note: Control
panel lists function as well as desired outcome.
3. Press OFF to stop and turn off blender.
Fig1
Fig2
Locking
Sealing Ring
Threaded Jar
Bottom with
locking lever
Fig3
Incorrect
Correct!
Blade
Fig4
Locking Lever
Using The Oster
®
Texture Select Master Series Blender
Before you use the product for the first time, separate the lid, filler cap and blade from
the jar. Wash in warm, soapy water, or top rack in the dishwasher. Rinse and dry well.
WARNING: Blade is sharp. Handle with care.
a
b
c
d
e
THIN
SMOOTHIE
FOOD CHOP
MEDIUM
THICK
THICKNESS
FOOD MODE
f
