2. Common default and solution
Problem
Display
Cause
Solution
Totally no
working
No display
The power plug is not plugged
in and the power switch is not
pressed.
Plug in the power plug and press
the power switch.
No display
The outlet has no electricity or
the fuse is broken.
Ask an electrician to check the
socket or fuse.
No display
The power outage causes the
program to disappear and the
operator must operate it again
after the call.
After starting the call, press again
to operate each press.
There is no
display when
the voltage is
too low, or the
fuse may be
open when the
voltage is too
high.
The voltage is too low or too
high.
Unplug the power plug and wait
until the voltage is normal
Poor
drainage
E1
The outlet of the drain pipe is
too high or blocked, resulting in
the water not being discharged
after 5 minutes
After checking the drain and
rectifying the fault, open the cover,
close it, and re-enter the drain.
Not
dehydrated
E2
No cover when washing (pause
and alarm) or dehydration
(cover and alarm)
Cover the cover.
Dehydration
touch
the
shell
E3
Because the laundry unevenly
touches the shell when it is
unbalanced during the
dehydration, the washing
machine will automatically
correct it, and if it is still invalid
after two times, it will alarm.
Open the top cover, place the
clothes manually and close the
cover.
Insufficient
water
injection
E4
The faucet is not on, the water
is stopped or the water
pressure is low. After 16
minutes, the water level is less
than the set water level.
Open the tap or wait until the water
pressure is normal before use.
Open the cover, close the cover,
and re-enter the water inlet
process.
Reservation E5
Reservation for open the cover Close the upper cover
14
Содержание OS-WSMD18S
Страница 1: ...MODELO MODEL OS WSMD18S ...
Страница 35: ......