Oster OS-DF600S, Инструкция по эксплуатации

Страница: 16 / 21

• The thermostat control situated in the appliance regulates the temperature.
NOTE: Do not leave the appliance to run at position ‘’5’’ for prolonged period as this will
damage the compressor and the food inside the freezer.
• Regulate the thermostat to ‘’3’’ to check on the operation before switching to higher
cooling level.
NOTE: the optimum cooling level is position ‘’THREE or FOUR’’ (to avoid over cooling and
damaged to the compressor)
• Check the temperature after 4 hours, If the cooling has reached to acceptable level, you
may start using the appliance.
• The Temperature will be affected by.
− Room temperature.
− How often the door is opened
− How much food is stored
• In determining the correct temperature control setting, all the above factors have to be
considered and some experimentation may be required.
• Always store the hot food after it is completely cold. Never store hot items inside the
appliance
• Always pack the food properly before putting into the appliance to avoid taste maxing and
frosting together.
• If there is an electricity cut-off, please wait 10 minutes before operating the appliance
again to avoid damage the compressor.
English-5
OPERATING THE APPLIANCE