3
23. Read and follow the specific “Precautions to Avoid Possible Exposure to Excessive Microwave Energy” section found
below.
24. When cleaning microwave surface and door, use only mild, nonabrasive soaps or detergents applied with a sponge or
soft cloth.
25. This microwave should be serviced only by qualified service personnel. For service and repair, please contact our
Customer Support Center at 1-866-257-3336.
1. Do not attempt to operate this microwave with the door open. Door open operation can result in harmful exposure to
microwave energy. It is important not to defeat of tamper with the safety interlocks.
2. Do not place any objects between the microwave front face and the door, or allow soil or cleaner residue to
accumulate on sealing surfaces.
3. Do not operate the microwave if damaged. It is particularly important that the microwave door be properly closed and
there is no damage to the door (bent), hinges and latches (broken or loosened), or door seals and sealing surfaces.
4. The microwave should not be adjusted or repaired by anyone except properly qualified service personnel.
SAVE THESE INSTRUCTIONS
1. Make sure all packing materials are removed from inside the microwave door.
2. Check the microwave for damage, such as misaligned or bent door, damaged door seals and sealing surface, broken
or loose door hinges and latches, and dents inside the cavity or on the door. If there are any damages, do not operate
the microwave and contact Customer Service at 1-866-257-3336.
3. This microwave must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked
inside.
4. Do not place the oven where heat, moisture, or high humidity is generated. Do not place microwave near combustible
materials.
5. For correct operation, the oven must have sufficient air flow.
Allow 8” of space above the microwave, 4” at the back,
and 2” on each side of the unit.
6. Do not cover or block any openings on the microwave. Do not remove microwave feet. Do not operate the oven without
the glass tray, roller support, and shaft in their proper positions.
7. Make sure the power supply cord is undamaged and does not run under the microwave or over any hot or sharp
surface.
8. The socket must be readily accessible so the microwave can be easily unplugged in an emergency.
IMPORTANT SAFETY INSTRUCTIONS (continued)
INSTALLATION GUIDE
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY