Oster OD20, Инструкция по эксплуатации

Страница: 17 / 24

English - 5
Turning the unit on and off
1. Plug the unit into a suitable electrical outlet.
2. In the standby state, press the power button to turn on, the operation indicator lights
up and the default fan speed is high, the LED shows ambient humidity.
3. To shut down: In the power-on state, press the power button to turn off, the running
indicator light goes off and the compressor stops immediately, and then the fan will
shut down after 30 seconds.
Protection and auto shutdown of the tank when it is full of water
Once the unit is on, press the Automatic button . When the water tank is full, the water
tank full light will come on and the unit will turn off automatically. This indicates that it
is time to empty the water tank before using the unit again. Once the empty water tank is
back in the unit, it will take 3 minutes before the dehumidifying compressor runs again.
This is a protection feature. If you want to restart the unit without waiting, unplug it from
the outlet and plug it in again.
Protection against dripping water
When the water tank is removed to empty it, this device stores the condensed water that
continues to drip. Once the water tank is back in the unit, it will release that water into the
tank.
Auto mode
When the environmental humidity set is ≥ +3%, the fan starts working and compressor
starts working after 3 seconds. When environmental humidity ≤ set humidity -3%, the
compressor stops working and fan stops working after 30 seconds. Both fan speed and
humidity can be adjusted under auto mode.
Sleep Mode
Touch the sleep button , the button lights up and the sleep function will be activated.
Press and hold the sleep button for 3 seconds to reset the filter.
Timer
Press the timer button to set the 0-12 hour timing function. The interval is 1 hour.
Each time you press this button, the value increased 1 hours and then the corresponding
timing value is displayed on the screen. The setting value is “00” to cancel the timer
function. The indicator turns out. After the timer is set and completed, the timer LED is on
during the timing period. After the timing is over, the timer LED turns off automatically.
In the running state, set the time to turn off the machine;
in the standby state, set the time to turn on the machine.
Speed
Only in automatic mode, touch this button to switch between high and low fan speed, and
the indicator light is on
OPERATING