English-5
DRY IRONING
1. Insert the plug in the electrical wall outlet.
2. Make sure the steam select switch is in the closed position.
3. Select the desired temperature on the temperature control dial.
4. Follow instructions from section “Using Steam Your Iron” for your iron model.
5. Start dry ironing.
STEAM IRONING
Choosing the Right Water
This steam iron may be used with normal tap water. However, if the water of the
region in which you live is especially hard, it is recommended to use distilled water to
prolong the life of your iron.
Do not use water that has been desalinated with chemicals.
Filling with Water
1. Turn off the iron and disconnect the plug from the electrical wall outlet before
filling the iron with water.
2. Turn the steam select switch to the closed position.
3. Set iron in the position indicated below (figure 2) and fill it with water, no higher
than the Max fill level shown on see-through water window.
Figure 2
