English-7
The vertical shot steam feature allows your iron to function as a garment steamer.
TIP: When using the vertical shot of steam on clothing, hang the clothing on a clothes
hanger for best results. Hanging curtains and drapes may also be steamed.
HOW TO USE VERTICAL STEAM
1. Allow iron to warm up (2 minutes).
2. Hold the iron in a vertical position, with the iron close to but not touching the fabric
you want to steam.
3. With your other hand, pull the fabric tight.
4. Press the Shot of Steam button in approximately 3-second intervals as you move the
iron across the wrinkled area.
WARNING: To prevent the risk of burns, keep your hand away from the area being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.
The Shot of Steam feature provides an extra burst of steam for deep penetration of
stubborn wrinkles. The Shot of Steam feature can be used with dry or steam ironing
provided it has at least a ¼ tank of water and the Temperature Control Dial is set within
the steam band.
1. Allow the iron to heat for approximately two minutes.
2. Press the Shot of Steam Button several times to prime the pump.
3. Press the Shot of Steam Button another three to four times in order to clean the unit.
4. The Shot of Steam feature is now ready for use. The Shot of Steam feature can be
used continuously with just a short pause between shots. The Shot of Steam feature
is most effective with the Iron held in a horizontal position just above the fabric being
ironed.
5. If the Water Reservoir runs dry, unplug the Iron and refill with water. The Iron may be
filled with water while it is hot. Note: It may be necessary to re-prime the pump before
using the Shot of Steam feature again.
SHOT OF STEAM
VERTICAL SHOT OF STEAM
GCSTAC6901_GCSTAC6902_GCSTAC6951_GCSTAC6952_GCSTAC6953_20SEM1 (LA).indd 7
GCSTAC6901_GCSTAC6902_GCSTAC6951_GCSTAC6952_GCSTAC6953_20SEM1 (LA).indd 7
5/21/20 09:27
5/21/20 09:27
