Oster FPSTHB2607, Инструкция по эксплуатации

Страница: 5 / 16

4
BEFORE FIRST USE
Read and follow all the instructions for this section on Use and Care and find a place to
keep this instruction manual ready for future reference.
NOTE:
The use of attachments not recommended or sold by the manufacturer may
cause fire, electrical shock, injury or damage to the product.
ASSEMBLING YOUR HAND BLENDER
Your Hand Blender is a two-part assembly. The upper part contains the Motor Housing
and the Speed Buttons. The lower part contains the Beater Shaft/ Blade Housing.
To Lock: Hold the Motor Housing in the right hand and the Beater Shaft/ Blade
Housing in the left. Attach the Motor Housing up to the Beater Shaft/ Blade Housing.
Rotate the Motor Housing to the right. The assembly locks firmly.
To Unlock: Hold the Motor Housing in the right hand and the Beater Shaft/ Blade
Housing in the left. Rotate the Motor Housing to the left to separate the units.
TO OPERATE YOUR HAND BLENDER
• Immerse the Blade Housing completely into ingredients.
• Depress the High or Low button and begin mixing ingredients by moving the appliance
up and down and in circles. For continuous mixing, maintain pressure on button for a
maximum of 1 minute.
• Hold the Hand Blender firmly.
NOTE:
During mixing, it is normal for suction to be created at the bottom of the container.
• When desired consistency has been reached, release Button and lift the Hand Blender
from mixture. To prevent splashing, always release Button before removing Hand
Blender from ingredients.
CAUTION:
To extend the life of this appliance, never let it operate continuously for more
than 1 minute at a time. After 1 minute of continuous operation, release Button and let
appliance rest for 3 minutes before using it again.
WARNING:
Do not use Hand Blender in saucepan directly on stovetop. Remove pan
from heat before mixing.
REMOVAL OF BEATER SHAFT
Grasp beater shaft firmly and rotate Motor Housing to the left.
INSTRUCTIONS FOR USE