www.oster.com
www.oster.com
5
4
LEARNING ABOUT YOUR
ELECTRIC WOK
Lid Handle
Removable Glass Lid
Handle
Temperature Control Probe
Temperature Control Dial
Base
Duraceramic Cooking Surface
a
e
b
f
c
g
d
This appliance features a DuraCeramic™ non-stick natural
ceramic coating which is 4X more durable than other
non-stick coatings. This means there’s no flaking or peeling
off to worry about. Furthermore, the ultra-durable ceramic
coating cooks faster than other non-stick coatings, saving
time and energy. The natural DuraCeramic non-stick coating
also offers greater health and benefits as it’s free of PTFE
and PFOA. 4X More Durable – DuraCeramic™!
Congratulations on your purchase of a DuraCeramic™
appliance!
HOW TO:
Introduction
Before using your new appliance, wash the inside of the pan
with warm, soapy water and dry. When washing the wok, make
sure the temperature controller is removed.
The OSTER Electric Wok is now ready for use.
How To Use Your Electric Wok
1. Set your Wok on a flat, dry, heat resistant surface.
2. Set the TEMPERATURE CONTROL DIAL to OFF and plug the
TEMPERATURE CONTROL PROBE into BASE OF on your Wok.
3. Plug the CORD into a 120V power outlet.
4. Set the TEMPERATURE CONTROL DIAL to the desired
temperature setting by aligning the temperature on the
TEMPERATURE CONTROL DIAL with the thermostat light. This
light will remain on until the set temperature has been
reached and then will cycle on and off throughout cooking,
as the cooking temperature is maintained by the thermostat.
NOTE: On initial heating of your Wok, it is recommended that
the temperature be allowed to cycle (the light glowing on and
off) several times. This will help the NON-STICK COOKING
SURFACE to adjust to a more accurate cooking temperature.
5. Use the GLASS LID when a moist-heat cooking method is
desired.
CAUTION: Your Wok is hot! Use hot pads or oven mitts.
6. After food is cooked, set the TEMPERATURE CONTROL DIAL to
the WARM setting until ready to serve, or to OFF if food is
removed immediately.
7. After cooking, turn the TEMPERATURE CONTROL DIAL to OFF.
Unplug the CORD from wall outlet. After your Wok has
cooled, remove the TEMPERATURE CONTROL PROBE.
CAUTION: The TEMPERATURE CONTROL PROBE may be hot.
c
a
b
d
e
g
f
c
CKSTWK99WM-ECO(DuraCeramic)_13EM1.indd 4-5
5/17/13 8:32 AM