www.oster.com
www.oster.com
7
6
• Before using the appliance for the first time, remove and peel off
any promotional materials and packaging materials, and check
that the cooking plates are clean and free of dust.
• Wipe down the appliance with a clean damp cloth. Clean and dry
the grill plate, drip tray and collection pan using the instructions
found in the cleaning and care section.
• Do not wash or submerge heating element, electric fan, or
appliance in water or other liquid.
• Clean the grill (See “Cleaning and care”). It is recommended to
heat up the grill for about 10 minutes without any food in order
to eliminate any grease that may have adhered during the
manufacturing process. Ventilate the room during this period.
When your grill is heated for the first time, it may emit slight
smoke or odor. This is normal with many heating appliances. This
does not affect the safety of your appliance.
• Ensure the power cord is kept away from cooking surfaces at all
times.
OPERATING INSTRUCTIONS
Unit Assembly diagram shown on page 5.
1. Place appliance on a clean, level surface that is heat resistant.
Allow for room on all sides of the
appliance for proper ventilation.
2. Assemble the appliance.
a. If handle is not assembled, assemble
the handle to the lid using the Lid
Handle Assembly instructions
b. Fill the Drip Tray (5) with 2 cups of
water. Place carefully into unit.
c. Insert Collection Pan (4)
d. Insert Heating Element (3)
e. Insert Grill Plate (2)
3. Plug power cord into a 120v wall outlet.
4. Push POWER button (B) to turn on
appliance and select target temperature
using the +/-temperature buttons (C).
The unit will start to preheat and LED
(A) will start to blink until the target
temperature is reached. Once
preheated, the light will turn to a solid red.
5. Push FAN button (D) to turn on the smoke capture fan. LED (E)
will illuminate to indicate the fan is on. The fan should be ON
throughout cooking process to reduce smoke.
6. Once preheated, place food onto grill plate (2) and cover with lid
(1). Keeping the lid on throughout cooking process will help to
maintain cooking temperature, prevent splatter, and capture
smoke.
HOW TO:
Lid Handle Assembly Instructions
Lid Handle Assembly Diagram shown on page 4.
1. Attach Silicone Gasket (3) under the handle base (2) if not
already attached.
2. Remove Screw (8) from handle (1)
3. Insert Screw (8) through Spring Washer (7).
4. Place the Metal Washer (6) over the Spring Washer (7) , then
place the Plastic Washer (5) over the Metal Washer (6) with the
embossing facing up.
5. Insert the Screw (8) and the washers through the bottom of the
Glass Lid (4).
6. Place the Handle Base (2) on top of the Glass Lid (4) . The Screw
(8) should be through the Handle Base (2), and the Silicone
Gasket (3) should be aligned to fit through the smaller hole of
the lid (4).
7. Thread the Handle (1) onto the Screw (8) and tighten using a
Phillips head screwdriver.
BEFORE FIRST USE
E
D
C
B
A
460f
A. Power LED
B. Power Button
C. +/-Temperature Buttons
D. Fan Button
E. Fan LED
