![background image](http://html1.mh-extra.com/html/oster/bvstem6801/bvstem6801_instruction-manual_1657172037.webp)
English-16
1.
To remove the detachable bottom covers from under the filters, rotate them counterclockwise
towards the unlock icon “ ”.
2.
Wash the detachable bottom covers and filters with warm soapy water. Make sure to rinse and
dry them well.
3.
Place the detachable bottom covers back onto the filters by inserting them in their place and then
rotating them clockwise (away from the unlock icon “ ”) until you hear it click.
FROTH MILK DISPENSING TUBE CLEANING - WITHOUT AFFECTING MILK IN RESERVOIR
1.
Ensure the milk reservoir and lid are properly inserted in the unit.
2.
Place a large empty mug under the froth dispensing tube.
3.
Turn the Froth Control Knob counter clockwise to the clean position
“ ” then press the “ ” button to activate the clean function. The unit will start releasing steam
through the froth dispensing tube. Let the cleaning cycle run until you no longer see any water
coming out of the tube, or let the cycle run until it stops automatically.
4.
Dispose of the water in the mug.
5.
You can remove the milk reservoir with the lid and store it in the fridge for later use.
CLEANING THE BREW HEAD, THE PORTA-FILTER AND FILTERS
1.
Press the on/off “I/O” switch located on the right side of the unit to the off position “O” and unplug
the power cord from the electrical outlet.
2.
Some of the metal parts may still be hot. Do not touch them with your hands until they have
cooled.
3.
Remove the porta-filter and discard the coffee grounds or used pod. Wash both the porta-filter
and filter thoroughly with warm soapy water. Make sure to rinse and dry them well.
NOTE: Do not wash the porta-filters and filters in the dishwasher.
4.
Wipe the lower part of the brew head in the unit with a damp cloth or paper towel to remove any
coffee grounds that might have been left.
5.
Place the porta-filter (without any filter) back in the brew head in the unit and lock it in place.
6.
Place a large empty cup under the porta-filter.
7.
Plug the power cord into the electrical outlet. Press the on/off “I/O” switch to the on position “I”.
Press the Espresso “ ” button once and let the unit brew with water until it stops automatically.
Unlock
Step1
Step2
Step3
Lift
Push
Remove
Remove
Seal
Remove
Filter
Unlock
Step1
Step2
Step3
Lift
Push
Remove
Remove
Seal
Remove
Filter
Unlock
Step1
Step2
Step3
Lift
Push
Remove
Remove
Seal
Remove
Filter
BVSTEM6801_22SEPM1 (LA).indd 16
BVSTEM6801_22SEPM1 (LA).indd 16
2022/6/6 9:53 AM
2022/6/6 9:53 AM