7
6
CAUTION: To extend the life of this appliance, never let it operate continuously for more than
1 minute at a time. After 1 minute of continuous operation, release Button and let appliance
rest for 3 minutes before using it again.
WARNING: Do not use Hand Blender in saucepan directly on stovetop.
Remove pan from heat before mixing.
MIXING/MEASURING CUP INFORMATION (MODELS 2612-049 & 2616-049 ONLY)
• The lid can be easily used as a cover for storage
• For added stability, use the dual purpose lid on the base of the Mixing/Measuring Cup
• The Cup which is included with your Hand Blender functions as a mixing cup, a measuring
cup and can also be used for storage
MEASURING CHART FOR BLENDING CUP
MILLILITERS
CUPS
OUNCES
50
.21
1.70
100
.42
3.40
150
.63
5.00
200
.85
6.76
250
1.10
8.50
300
1.25
10.00
350
1.50
12.00
400
1.70
13.50
450
1.90
15.25
500
2.10
17.00
550
2.32
18.50
600
2.50
20.25
650
2.75
22.00
700
3.00
24.00
REMOVAL OF BEATER SHAFT
Grasp beater shaft firmly and rotate Motor Housing to the right.
USING THE CHOPPER ATTACHMENT (MODELS 2612-049 & 2616-049 ONLY)
The chopper accessory is ideal for chopping a wide range of vegetables, dried fruits, nuts, etc.
• Insert Chopping Blade into the Chopping Bowl
• For best results, cut large ingredients into pieces of approximately 1/2-inch cubed before
chopping
NOTE: Do not chop large ice cubes or extremely hard foods, such as whole nutmegs, coffee
beans, dried corn and grains.
• Secure the Chopper cover by setting on the Bowl and turning to the right until firmly locked
into place. The upper shaft of the Chopping Blade will fit into the receiving hole in the
underside of the Cover
• Attach the Motor Housing into the top of the Bowl cover and turn to the right until the Motor
Housing is firmly locked into place. Plug cord into convenient outlet
• The chopper has two speeds. Press and hold the appropriate button to switch the Hand
Blender on. Release the button to switch the unit off
• Use the slow speed where possible especially if you want to chop the food into bigger
pieces. The high speed can be used for chopping the food to small pieces or for pureed
foods
• You can adjust the speed of the unit with the Speed Control when using slow speed or high
speed function
• Set the Speed Control Dial to the desired speed and depress the slow or high speed button
as desired
• If the ingredients stick to the Chopper Bowl sides, loosen them by adding a small amount of
liquid or by using a spatula to scrape the food back into the inner part of the Bowl
• Release the Speed Control Button and allow the blade to come to a complete stop before
removing the Bowl Cover by turning cover to the left. Take care when removing the Blade
and hold only by the shaft handle as the metal blade is sharp
NOTE: Do not clean blades with fingers but use a spoon or spatula to scrape food into Bowl
after Blade is removed.
CAUTION: Unplug the appliance before attaching the chopper attachment. Put the food
ingredients in the Chopper Bowl, secure the Bowl Cover to the Chopping Bowl and attach
the Motor Housing to it. Use the slow speed, especially if you are chopping lumps in the
ingredients. The high speed can be used as a finishing touch.
USING THE WHISK
(MODEL 2616-049 ONLY)
• Use the whisk only to prepare whip cream, egg whites, mousses or quick desserts.
• Insert the Whisk into the Motor Housing until it is locked
• Immerse the Whisk into bowl where you have placed the ingredients and push the Slow
Speed Button. It is recommended to use a wide bowl
CAUTION: To extend the life of this appliance, never let it operate continuously for more than
1 minute at a time. After 1 minute of continuous operation, release Button and let appliance
rest for 3 minutes before using it again.
• When desired consistency has been reached, release Button and lift the Hand Blender from
mixture. To prevent splashing, always release button before removing Hand Blender from
ingredients
• To remove the Whisk, turn it to the left and remove it from the Motor Housing
2612_2616_2616WA-049_14EM1.indd 6-7
9/12/14 11:50 AM
