HDMI Microscope
User Manual
KS
103300
G4-Ver1.0
- 6 -
Chapter 4 Installation Guide
4.1 Methods of application of electron microscope
-+
1
、
Display assembly: 1) Unscrew a total of 7 screws on both ends of the column
2) Take out the bottom plate, and fix the column on the bottom plate with 3 screws.
3) Mount the camera on the column and tighten the knob.
4) Take out the display screen, and fix it on the column with the 4 screws.
2
、
Cabling:
1) Connect mini port of the HDMI cable with the HDMI Mini port of the camera, and fasten it with the
screws provided, as shown in Figure 5; the other end HDMI-A is connected to the display monitor, as shown in Figure 6.
2) Power the display screen with provided 110-240V AC plug, as shown in Figure 6.
3
、
start to use:
1) Turn on the monitor and camera 2
）
Adjust the camera position 3
）
Adjust the focal length
