OSTBERG HERU 400-2400 S, Руководство пользователя

Страница: 83 / 120

83 / 120
2018-02-13 Climatix HERU® 400-2400
Miscellaneous
–
Active
–
Calendar time enabled
Choice-x
–
Date
–
Interval
–
WeekDay
–
Passive
Specification of exception type:
–
A certain day (e.g. Friday).
–
A period (e.g. holiday).
–
A certain day of the week.
–
Times are disabled.
This value must always be placed last,
after the date.
-(Start) Date
–
Choice-x = interval: Enter the start
date for the period.
–
Choice-x = date: Enter specific date.)
– End date Choice-x = interval: Enter the end date
for the period. The end date must be
later than the start date.
– Week day Choice-x = only day of the week: Enter a
day of the week.
Only the time for (start) is relevant.
•
– (Start)Date = *,01.01.09
Result: 1 January 2009 is an exception date.
•
– (Start)Date = Mon,*.*.00
Every Monday is an exception date.
•
– (Start)Date = *,*.Even.00
All days in even months (February, April, June, August, etc) are exception days.
The times for (Start)Date and End Date are applied.
•
– (Start)Date = *,23.06.09 / -End Date = *,12.07.09
23 June 2009 to 12 July 2009 are exception days (holidays, for example).
–(Start)Date = *,23.12.00 / - End Date = *,31.12.00
23 - 31 December is an exception period every year. Time End Date = *,01.01.00 does
not work, because 1 January comes before 23 December.
•
– (Start)Date = *,23.12.09 / -End Date = *,01.01.10.
23 December 2009 to 1 January 2010 are exception days.
•
– (Start)Date = *,*.*.00 / -End Date = *,*.*.00
Warning! This means that the exception is always active! The unit is constantly in
exception mode or switched off.
The times for days of the week are applied.
•
Day of the week = *,Fr,*
Every Friday is an exception day.
•
Day of the week = *,Fr, Even
Every Friday in even months (February, April, June, August, etc) is an exception day.
•
Week day = *,*,*
Warning! This means that the exception is always active! The unit is constantly in
exception mode or switched off.
Configuration
The unit is configured according to preferences. Configuration includes the following
three steps:
Example:
Choice-x = Date
Example:
Choice-1 = Interval
Example:
Choice-1 = Day of the
week
Configuration
Principle