One Stop Systems
OSS-KIT-EXP-61611-XM | 38
You can check the Host and Target devices by using the command below.
#lspci –vvv | grep c010
The output below shows a link between Host card and the Target card.
The output below shows only the Host is being detected. The Host card is not connected to the Target card.
To check or to identify whether the bus XX:XX.0 is the Upstream port and Downstream port, on the terminal window type
lspci –s ac:00.0 -
vvv | grep ‘Capabilities\|Port\|LnkSta\|LnkCap’
or lspci –nvvs –ac:00.00 |
grep ‘Capabilities\|Port\|LnkSta\|LnkCap’
