OSS EWS1, Руководство пользователя, Страница: 7 / 18

Getting Started
1. Insert batteries into the weather station monitor.
(3 x 1.5 V AAA not included)
2. Insert batteries into the wireless sensor.
(2 x 1.5 V AAA not included)
3. When inserting the batteries make sure the polarity is
correct to avoid damaging the weather station or sensor.
Only use alkaline batteries of the same type; do not use
rechargeable batteries.
4. Place the two units next to each other. The weather
station will automatically detect the sensor signal within 3
minutes. If signal from the sensor is not detected,
long-press the button on the weather station to repeat
the search. Refer to page.8 for more info.
5. We recommend placing the sensor on the north side of
the house. The range of the sensor may decrease
substantially in areas with a large number of obstacles.
6. The sensor is resistant to water mist; however, it should
not be exposed to sustained rain.
7. Do not place the sensor onto metal objects as this will
reduce its transmission range.
8. If the low battery icon is displayed, replace batteries in the
sensor or weather station.
All changes in values are made using buttons and .
After setting the desired value and not pressing any other
buttons, the set values will automatically save and the
display will switch to the main screen.
Radio Controlled Clock (EWS1) cont... Manual Settings
2 7