www.osram-os.com
13 / 18
2020-06-04 | Document No.: AN149
D. OSRAM OSTAR
®
Projection Power SMT
OSRAM OSTAR® Projection Power SMT devices (LE x P0MQ/AQ) come with a
copper substrate which offers lowest thermal resistance. These devices also
comprise a large electrical isolated thermal pad for better thermal dissipation.
The amber and (deep) blue devices are windowless to avoid light losses due to
cover reflectivity and stray light. The converted green LED is cast in silicon to
ensure maximum system level efficiency.
OSRAM OSTAR
®
Projection Power SMT devices have a protective tape
covering the chip area (Figure 15) for the (deep) blue and amber devices. This
tape also protects the LED also during the soldering process and should be left
in place until initial operation.
Figure 15: Protective tape for (deep) blue and amber colored OSRAM OSTAR
®
Projection Power
Figure 16 shows an overview of all the OSRAM OSTAR
®
Projection Power SMT
devices
Figure 16: Overview of OSRAM OSTAR
®
Projection Power SMT devices
LE CG P0AQ
LE A P0MQ
LE B P0MQ
LE D P0MQ
