Osram ADB Stagelight LEXPERT PROFILE L, Инструкция по эксплуатации

Страница: 11 / 20

LEXPERT PROFILE L
11
DMX Address
To select the
DMX Address
, press the
ENTER
button to show
DMX ADDRESS
on the display. Use the
DOWN
/
UP
button to adjust the address from
1
to
512
. Once the address has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button
again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Setup
To select
Setup
press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
DMX Modes, Dimmer Settings, Output Modes, Data Input,
Ethernet Interface,
Display Setting or Frequency
.
DMX Modes
To select the
DMX Modes
, press the
ENTER
button to show
DMX Modes
on the display. Use the
DOWN
/
UP
button to select the
Mode1, Mode2,
Mode3, Mode4
or
Mode5
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press
the
MENU
button again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Dimmer Settings
To select the
Dimmer Settings
, press the
ENTER
button to show
Dimmer Settings
on the display. Use the
DOWN
/
UP
button to select the
Dimmer
Curve
or
Dimmer Speed
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press
the
MENU
button again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Dimmer Curve
To select the
Dimmer Curve
, press the
ENTER
button to show
Dimmer Curve
on the display. Use the
DOWN
/
UP
button to select the
Quadratic,
Linear, Inv.square
or
S Curve
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes
press the
MENU
button again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
DIMMER CURVES
Curve 1 - Linear:
The increase in light intensity appears to be linear as DMX value is increased.
Curve 2 - Quadratic:
Light intensity control is finer at low levels and coarser at high levels.
Curve 3 - Inverse Square:
Light intensity control is coarser at low levels and finger at high levels.
Curve 4 - (S-curve):
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Dimmer Speed
To select the
Dimmer Speed
, press the
ENTER
button to show
Dimmer Speed
on the display. Use the
DOWN
/
UP
button to select the
Fast
or
Smooth
.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again.
Hold and press the
MENU
button for one second or wait for one
Output Modes
To select the
Output Modes
, press the
ENTER
button to show
Output Modes
on the display. Use the
DOWN
/
UP
button to select the
Boost, Regulated,
Silent
or
Ultra Silent
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Data Input
To select the
Data Input
, press the
ENTER
button to show
Data Input
on the display. Use the
DOWN
/
UP
button to select the
Auto, DMX
or
Art-Net
.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again.
Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Ethernet interface
To select the
Ethernet Interface
, press the
ENTER
button to show
Ethernet Interface
on the display. Use the
DOWN
/
UP
button to select the
Network,
Art-net
or
Repeat on DMX
. Once the mode has been selected, press the
ENTER
button to setup, to go back to the functions without any changes
press the
MENU
button again. Hold and press the
MENU
button for one second or wait for one minute to exit the menu mode.
Linear Quadratic Inverse Square S-curve