Osprey Talon G2 model SAH-E23, Руководство пользователя

Страница: 10 / 50

Osprey Talon User Guide
9
© 2016 Osprey Video. Osprey®, Ceylon® & SimulStream® are registered trademarks of Osprey Video AG. All other trademarks are the property of their respective owners.
Product specifications and availability may change without notice <20161223
assign an address before the DHCP server can respond. If Talon powers up fully and the
encoder is set to auto-start the encoder could fail. If this happens, wait until the network
recovers and then power cycle your Talon to receive the DHCP address.
Osprey BOSS With an Invalid Static IP
You might find that you have configured Talon for a static IP on one network and then
moved it to a network where that address is invalid. Simply connect Talon to the current
network. Then start Osprey BOSS on a PC on that network. BOSS will identify the address
of the Talon even though it will not be able to connect with the web GUI. Similar to the
scenario above, use BOSS to change the invalid static IP to one that is valid on the
current network. Then access the web GUI and complete the updating of the address
on Talon.
Unknown IP Address Without Osprey BOSS
In this scenario, Talon is installed on a network and already has an IP address. You find
yourself without access to Osprey BOSS. With Talon powered up and attached to the
network, insert a thumb drive in the USB port of Talon. The thumb drive needs to be
formatted with either FAT or FAT32. After about minute remove the thumb drive and
insert it in another computer
. On the drive, there will be a file called “TalonIP.txt” that
will contain the IP address and MAC address of your Talon. You can then use the IP
address to connect via a modern browser. Any time you insert a thumb drive into Talon
a “TalonIP.txt” file wil l be created.
IMPORTANT NOTE: Talon is only compatible with IPv4 addresses. Never connect an
Osprey Talon system to the Internet through a direct connection. We recommend
taking precautions against unwanted access such as installing systems behind a router
or firewall. The speed of the router or switch should match or exceed the speed of the
system’s network card. See your network administrator for recommendations.