LDT4826GD (SF)
LOADOUT 48” GAMING DESK
ASSEMBLY INSTRUCTIONS
LDT4826GD (SF)
LOADOUT 48” GAMING DESK
ASSEMBLY INSTRUCTIONS
Remove all the parts from carton, separate them into part numbers indicated on the list and make sure part quantities are correct.
STEP 1
Screw in four Cam Screws (C) into Desktop (2), two Cam Screws (C) into both Left Side Frame (3) and Right Side Frame (4).
FULLY TIGHTEN ALL
CAM SCREWS (C).
Insert four Wooden Dowels (B) into Back Panel (5). Use a small amount of Glue (A) per hole, be careful not to over fill hole.
Note: Using a rubber mallet, gently tap Wooden Dowel (B) to ensure it is sitting properly.
STEP 2
Attach Left Side Frame (3) and Right Side Frame (4) to Middle Front Crossbar (6) and Back Panel (5) using two Cam Nuts (D) and two
Allen Bolts (F) for each side frame.
FULLY TIGHTEN ALL CAM NUTS (D) AND ALL ALLEN BOLTS (F).
STEP 3
Secure top end of Back Frame (9) to Back Panel (5) using two Allen Bolts (G). Secure Rear Lower Crossbar (7) using two Allen Bolts (F).
FULLY
TIGHTEN ALL ALL ALLEN BOLTS (F & G).
STEP 4
Attach Desktop (2) to assembly and secure using four Cam Nuts (D), four Allen Bolts (H) and four Allen Bolts (F).
FULLY TIGHTEN ALL
CAM NUTS (D) AND ALL ALLEN BOLTS (H & F).
FRONT
C
B
STEP 1
STEP 2
2
STEP 4
STEP 3
C
C
3
4
5
4
6
F
9
I
7
D
6
4
5
3
7
F
G
5
2
H
D
F
9
