HARDWARE LIST
NO
DRAWING
DESCRIPTION
SIZE
QUANTITY
1
Bolt
8 PCS
4 PCS
4 PCS
Bolt
Flat Washer
M6 X 25mm
M6 X 20mm
Ø6 x Ø18
Allen Wrench
1 PC
M6
2
3
4
8 PCS
Plastic Cap
N/A
5
(A) Caster (5 PCS)
(B) Base (1 PC)
(C) Pneumatic Cylinder (1 PC)
(D) Bellows (1 PC)
(E) Seat Plate (1 PC)
(F) Arms (L & R) (2 PCS)
PARTS
(G) Back Cushion (1 PC)
(H) Seat Cushion (1 PC)
IFX25
INFLUX GAMING CHAIR
ASSEMBLY INSTRUCTIONS
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (A) into Base (B), push hard until you feel or hear the Caster (A) snap into place. Insert Pneumatic Cylinder (C) into Base (B) and
slip Bellows (D) over Pneumatic Cylinder (C).
STEP 2
Attach Seat Plate (E) to Seat Cushion (H) using four Flat Washers (4) and four Bolts (2)
FULLY TIGHTEN ALL BOLTS (2) USING
ALLEN WRENCH (3).
STEP 3
Place the assembled seat on top of Pneumatic Cylinder (C) and apply downward pressure.
STEP 4
Attach Arms (FL & F2) to Seat Cushion (H) using two Bolts (1) for each Arm (F).
DO NOT FULLY TIGHTEN BOLTS.
STEP 1
STEP 2
D
C
H
3
2
4
E
B
A
STEP 3
STEP 4
C
3
1
FR
FL
H
