IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools may cause damage
2. Carefully remove any staples used for packaging.
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Secure Upper Cross Bar (2) and Lower Cross Bar (3) between Side Frames (1L & 1R) using two Long Machine Screws (9) for each cross bar.
DO NOT FULLY TIGHTEN SCREWS
.
PART QTY
1.
Side Frame (1L & 1R) . . . . . . . . . . 2
2.
Upper Cross Bar . . . . . . . . . . . . . . 1
3.
Lower Cross Bar . . . . . . . . . . . . . . 1
4.
Top . . . . . . . . . . . . . . . . . . . . . . . . 1
5.
Middle Shelf . . . . . . . . . . . . . . . . . . 1
6.
Bottom Shelf . . . . . . . . . . . . . . . . . 1
7.
Cross Bar . . . . . . . . . . . . . . . . . . . . 2
8.
Short Machine Screw . . . . . . . . . . 2
9.
Long Machine Screw . . . . . . . . . . . 4
10.
Short Wood Screw . . . . . . . . . . . . 7
11.
Long Wood Screw . . . . . . . . . . . . 8
12.
Allen Wrench (not shown) . . . . . . 1
ORN27BK
ORION BOOKCASE
ASSEMBLY INSTRUCTIONS
ORN27BK
ORION BOOKCASE
ASSEMBLY INSTRUCTIONS
STEP 2
Secure Top (4), Middle Shelf (5) and Bottom Shelf (6) between Side Frames (1L & 1R) using five Long Wood Screws (11) for each Side Frame (1) .
DO NOT FULLY TIGHTEN SCREWS
. Secure Middle Shelf (5) to Upper Cross Bar (2) using three Short Wood Screws (10), secure Bottom Shelf (6) to
Lower Cross Bar (3) using two Short Wood Screws (10).
APPLY FIRM PRESSURE TO ALIGN AND FULLY TIGHTEN ALL SCREWS.
STEP 3
Secure both Cross Bars (7) to rear of assembly using two Short Machine Screws (8) for top of assembly and two Short Wood Screws (10) for bottom
of assembly.
FULLY TIGHTEN ALL SCREWS.
IMPORTANT NOTE: PLEASE MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING BOOKCASE.
STEP 1
STEP 2
STEP 3
1L
1L
1R
1R
4
5
6
2
3
9
10
10
11
11
8
10
7
© Office Star Products April 2012
